TalkingCalc
Home › Guides › How Much Paint, Tile and Concrete Do You Need?

How Much Paint, Tile and Concrete Do You Need?

Estimate materials for a room or slab: wall area for paint, tiles with waste allowance, and concrete volume, with practical tips to avoid shortages.

3 min read · Updated 2026-11-17

Why estimates matter

Ordering too little means a second trip and, with paint or tiles, a possible colour or batch mismatch. Ordering far too much wastes money. A careful estimate takes a few minutes and a tape measure, and the calculators do the arithmetic.

Paint: start with wall area

For the walls of a rectangular room, the area is the perimeter times the height. The perimeter is twice the length plus twice the width. A room of 5 m by 4 m with 2.7 m walls has a perimeter of 18 m and a wall area of 48.6 m². Subtract doors and windows, for example 2 m² per door and 1.5 m² per window, to get the paintable area.

Check the coverage on the paint can. Many paints cover roughly 8 to 12 square metres per litre per coat, but it depends on the product and the surface. Rough or porous walls take more. Most rooms need two coats, so multiply the area by the number of coats, divide by the coverage, and add a small allowance for touch-ups. Remember to paint the ceiling separately if needed.

Tiles and flooring: add a waste allowance

Floor area is length times width. Divide by the area of one tile or plank to get the count, and then add waste for cuts, breakage and mistakes. A common allowance is about 10% for straight layouts and up to 15% for diagonal or patterned layouts, or more for small rooms with many cuts.

It is smart to buy a few extra tiles beyond that and keep them for future repairs, because the same colour and batch may not be available later. Always round up to full boxes, since tiles are sold in whole boxes.

Concrete: volume in cubic metres

The volume of a slab is length × width × thickness, with all measurements in metres. A slab of 4 m by 3 m at a thickness of 0.1 m is 1.2 m³. Add a margin of around 5 to 10% for uneven ground and spillage. Concrete is often ordered in cubic metres, or by the number of bags when mixed on site, so check how your supplier measures it.

Measure twice, order once

  • Measure each wall or area separately and write the numbers down.
  • Break odd shapes into rectangles, calculate each, and add them.
  • Subtract only large openings. Small gaps can be ignored.
  • Check the product label for coverage and pack sizes.
  • Round up, never down, and keep the receipts in case you can return unopened packs.

Do not forget the trip

Heavy materials may need delivery or several trips. If you are collecting them yourself, the fuel cost calculator estimates the cost of the journey. Treat all calculator results as estimates, and follow the manufacturer's guidance and local building rules for structural work such as concrete.

Common questions

Do I subtract windows and doors from paint area? For large openings, yes. Small gaps are usually ignored because they are covered by the allowance you add.

How many coats of paint? Two coats are standard. A strong colour change, dark-to-light, or a bare surface may need a primer and a third coat.

Why buy extra tiles? Cuts, breakage and future repairs. Tiles from a different batch can differ slightly in colour or size, so keeping spares from the same batch is helpful.

Key takeaways

  • Paint: wall area minus openings, times coats, divided by coverage.
  • Tiles: floor area divided by tile area, plus 10% or more waste.
  • Concrete: length × width × thickness in metres, plus a small margin.
  • Round up and check the label.

Try the calculators

More guides